DrawBridge aka Arduino Amiga Floppy Disk Reader/Writer

Open Source and Free! - by RobSmithDev

Installing your DrawBridge PCB

It's actually really easy, unscrew the screw in the bottom, slide the case apart, swap out the board with the new one and put it back together.

However, a video is much simpler to follow:


Closing the Lid: If you have difficulty sliding the lid closed, then ensure the eject button is in the hole in the lid, and just carefully clip the case together. It doesn't need to be slid in.

Drivers: You may also need to install the FTDI drivers, which you can download from https://ftdichip.com/drivers/vcp-drivers/